The rebar straightening machine is also called a scrap rebar straightener machine, a steel bar straightening machine. It is the best machine for straightening scrap steel bars and disc steel bars. Put the bent steel bar into the machine from the entrance, and the machine can automatically straighten the steel bar. The machine is suitable for straightening different specifications and types of steel bars. The waste iron bar straightening machine straightens the steel bar by means of curve rotation, which will not damage or affect the strength of the steel bar.
Rebar Straightening Machine Models
| Model | YG-6 | YG-9 | YG-11 | YG-15 | YG-16 |
| Motor Power | 5.5KW | 9KW | 11KW | 15KW | 9+5.5KW |
| Round steel diameter | 4-10MM | 4-12MM | 4-12MM | 4-12MM | 4-12MM |
| Thread diameter | 4-8MM | 4-10MM | 4-10MM | 4-10MM | 4-10MM |
| Straightening rate | 30-45M/Minute | 30-50M/Minute | 35-55M/Minute | 35-55M/Minute | 0-55M/Minute |
| Machine weight | 230KG | 320KG | 500KG | 550KG | 550KG |
| Overall Size | 1400*570*900MM | 1680×630×1050MM | 1900×650×1100MM | 2050×650×1100MM | 2050×650×1100MM |
Note: The above is just a list of some of the parameters of the rebar straightening machine. For details, please consult our professional sales staff.
YG Steel Bar Straightening Machine For Sale
The structure of the YG rebar straightening machine is that the high-speed rotor rotates to adjust the angle of the straight wire dies to achieve the straightening effect. Then go forward through the threading wheel. After reaching the required size, the wire touches the positioning button and pushes the track forward by 5 mm. The upper punch presses the vertical wire cutter to cut it immediately. The wire passes through the pressure plate on the vertical wire cutter to press the open bearing, and the wire automatically falls to the wire support. If you want to change the length, move the positioning key. Leave your message to get a factory steel bar straightening machine price.
Why Straighten the Rebar?
Generally speaking, 6, 8, and 10 steel bars with a diameter of less than 10 are rolled and straightened for convenience. Also, rebar that is not bent straight cannot be used with concrete. If bent rebar is used with concrete, it will cause the concrete to crack. On the other hand, if a bent steel bar is used to cut the material, it may lead to an inaccurate length of the cut material, which will affect the shaping, bundling, and transportation of the steel bar.
Rebar Straightening Machine Application
The YG steel bar straightening machine has the characteristics of reasonable structure, convenient operation, safety, and reliability. Therefore, it is suitable for chicken cages, rabbit cages, construction meshes, various welding wires, shuffleboard wire cutting, and straightening of special-shaped mesh wires. Contact us to get a rebar straightening machinery price right now.
Features of Rebar Straightener Machine
- Cut the length of the steel bar without error.
- Double-head pulls type.
- Until the last of the steel is adjusted and pulled out.
- The construction wire adopts a tungsten steel mold.
- The product wire adopts the ball end mold, the steel bar that is called out will not damage the surface.
Work Principle of Rebar Straightening Machine
The automatic rebar straightening machine is firstly speeded up by a motor through a belt drive so that the straightening drum rotates at a high speed. Then straighten steel bar passing through the straightening cylinder, and remove the rust on the surface of the steel bar from the straightening die. And then, driven by a motor through another pair of reduction belts and a gear reduction box.
On the one hand, the two conveying rollers are driven to pull the steel bars forward. On the other hand, it drives the crank wheel to move the hammerhead up and down. When the steel bar is adjusted to the predetermined length, the hammerhead strikes the upper tool holder to cut the steel bar. When the cut steel bar falls into the receiving frame, the tool table returns to its original position due to the action of the spring, completing a cycle.
Installation Note
(1) The installation site of the rebar straightening machine should have a solid and firm drainage system and establish a reliable equipment foundation.
(2) Set up warning zones and warning signs around the steel bar straightening machining site. And erect safety fences.
(3) Erect safety fences and anti-smashing sheds outdoors and within the radius of rotation of the tower crane. Moreover, use electricity safely and regulated. There should be zero connection, grounding, and leakage protection devices.
(4) Operators must be trained in safe operation skills. In addition, they can only take up their posts after they are qualified. Contact us to learn more about rebar straighteners.
At the same time, we have a Rebar Straightening and Cutting Machine. Rebar Bending Machine, Thread Rolling Machine. Threaded Rebar Couplers. Rebar cutting machine and a series of reinforced machinery. Welcome rebar processing machine distributors to negotiate.
Related Products
As a professional rebar processing machinery manufacturer, we have a series of steel bar machinery for sale. Our product mainly includes a rebar straightening and cutting machine, a rebar bending machine, I beam bending machine, a scrap rebar straightening machine, an automatic steel bar cutting machine, steel bar straightening machine, a rebar upsetting machine, a thread rolling machine, thread rebar couplers, etc. What kind of rebar-related machine do you need? Please feel free to leave your requirements.
