The excavator vehicle dismantler is an attachment suitable for matching excavators to dismantle scrap cars. It is mainly used for the dismantling of small scrapped cars and buses. The car dismantling shear is equipped with high-strength blades, which can easily dismantle scrapped vehicles. Meet the needs of large scrap steel recycling stations and scrapped car dismantling yards.
Excavator Vehicle Dismantler Parameters
YG provides three types of car dismantling shears, they are 08A, 08C, and 08E. The parameters of the three types of vehicle dismantlers and the tonnage of the excavator are listed below. If you want to know more details about this device, please message us.
| Model | Unit | YG-08A |
| Suitable Excavator | T | 18-24 |
| Carrier Weight | KG | 1600 |
| Opening | MM | 850 |
| Blade Length | MM | 2-2*230 |
| Height | MM | 2530 |
| Width | MM | 1430 |
| Driving Pressure | KGF/CM2 | 320 |
| Driving Flow | LPM | 200-250 |
| Maximum Cutting Force | TON | 50 |
| Open Cycle Time | SEC | 2.3 |
| Close Cycle Time | SEC | 2.9 |
| Model | Unit | YG-08C |
| Suitable Excavator | T | 22-36 |
| Carrier Weight | KG | 1600 |
| Opening | MM | 650 |
| Blade Length | MM | 520 |
| Height | MM | 2400 |
| Width | MM | 1175 |
| Driving Pressure | KGF/CM2 | 320 |
| Driving Flow | LPM | 200-240 |
| Maximum Cutting Force | TON | 140 |
| Open Cycle Time | SEC | 2.3 |
| Close Cycle Time | SEC | 2.9 |
| Model | Unit | YG-08E |
| Suitable Excavator | T | 18-24 |
| Carrier Weight | KG | 1600 |
| Opening | MM | 720 |
| Blade Length | MM | 600 |
| Height | MM | 2300 |
| Width | MM | 1050 |
| Driving Pressure | KGF/CM2 | 320 |
| Driving Flow | LPM | 200-240 |
| Maximum Cutting Force | TON | 170 |
| Open Cycle Time | SEC | 1.51 |
| Close Cycle Time | SEC | 2.19 |
Why Use Hydraulic Car Scrapping Shears?
With the improvement of people’s living standards, the number of car owners is increasing, and the number of scrapped cars is also increasing year by year. Scrapped cars are generally pulled into the car factory for dismantling, some parts are processed and reused, and unusable parts are re-smelted and reshaped. Cutting a car usually requires an excavator with a vehicle dismantler. The car dismantling attachment has a slender mouth, which can easily grab objects and is not easy to fall off and wear. The teeth of the dismantling scissors are narrow at the front end, which can easily remove small parts of the vehicle. It can rotate 360 degrees, with high flexibility and high dismantling efficiency. It is the best equipment for dismantling cars in scrap steel factories and automobile manufacturers.
Advantages of Car Dismantling Shear for Excavators
- Realize 360-degree rotation, and high flexibility, and disassemble the vehicle shell and frame structure from multiple angles.
- Large-diameter oil cylinder with bite force, 360-degree rotation, using three-groove back support, the turntable is firmer.
- High work efficiency. Cutting 5-6 times per minute, saving loading and unloading time
- Easy to operate. The operator only needs to sit in the cab to operate and stay away from the workplace to avoid accidental injury.
YG Excavator Attachment Supplier
YG Engineering Machinery Manufacturer provides various types of excavators and excavator attachments. We provide small excavators ranging from 5 to 20 tons, medium excavators, and large excavators. Various excavator attachments: vibratory pile driver, hydraulic concrete pulverizer, excavator compactor attachment, excavator metal shear, excavator quick coupler, excavator rock hammer, etc. If you want to know about the excavator or excavator attachment, please leave us a message.
